Could you disable the following option at salient \ footer - footer reveal effect. See if that helps and if not then give us a link to the site we check this out from there.
H4 LED Bulbs: Labeling, Brands, Installation Process
Conventional head lamps with an h4(hikari h4 9003 led bulbs) cap combine low and high beam, working alternately. The dipped-beam spiral is separated by a reflector that restricts the ingress of the light flux into another part.
Not always drivers are satisfied with the light of car headlights, often the standard model is not enough in the dark. In this case, you can install ice lamps, characterized by lower power consumption and greater brightness.
The main thing is to choose the right high-quality model that will fully satisfy the needs of the car owner and at the same time will not blind the oncoming flow of cars. To make the right choice, initially you need to get acquainted with the features and types of led optics h4.
Construction
The distribution of the light beam depends on the location of the light source in the structure. With improper distribution, found in low-quality cheap samples, the oncoming flow is blinded, which is unacceptable.
Consequently, one of the main design features of non-standard car LED lamps is the correct location of the light source, strictly at the same points as that of regular halogen lamps. Otherwise, the headlight becomes not acceptable for operation.
The light source in any LED lamp for a car is the LED itself - the main element of the design. It is from him that the power and brightness of the lamp depends.
LEDs vary in shape: there are square, rectangular and round samples, as well as in size.
Each LED has its own amount of luminous flux, measured in lumines (lm). Several LEDs can be used to achieve the specified brightness parameters.
The size and power of the lamp depends on the shape, dimensions and number of LED elements.
For the operation of the LED, a special chip is used, a driver that heats up during operation. To cool it, the design necessarily includes a cooling system. It can be:
passive - is a flexible radiator consisting of many ribs resembling a "beam". This option is suitable for designs with a small driver.
active - is a special fan built into the design. It is used for more powerful variants with a large, very heated driver in the process, for which a passive system is not enough. Such a cooling system significantly increases the size and power of the lamp.
Tips for choosing
When buying diode models h4 for cars should be based on such parameters as:
Location of LEDs. The arrangement of the elements in the structure should be as similar as possible to the filament in a conventional lamp. Such options give the most correct distribution of light, and, as a result, good visibility and safety for oncoming cars. You can even estimate the location of the LEDs by eye. To do this, you need to take a diode lamp and a regular sample, and then compare them, looking at the lumen.
The size of the sample. Many samples of diode models h4 have much larger dimensions than the classic halogen version. Such options may simply not fit in the headlight, and then you will have to make special holes in the lid or buy an enlarged headlight cover. It is better to avoid such unnecessary painstaking work, unnecessary expenses and choose a lamp of the appropriate size.
The amount of luminous flux. You must adhere to the manufacturer's recommended values. Since insufficient light will not give proper visibility, and too strong - will interfere with oncoming motorists.
Normally, a conventional h4 lamp has a brightness of no more than 1000 lm when the low beam is turned on and no more than 1500 lm when the high beam is turned on. When choosing a diode lamp h4, it is worth buying models no more than one and a half times brighter than usual.
Color. Today you can find cold or warm bright white light. Color with blue, blue and lilac shades. The most comfortable for the human eye is light resembling sunlight, respectively, it is better to choose white daylight (warm) light. It is at this shade
a person sees the surrounding objects as clearly as possible.
Hi,
I can't find how to remove the section after the footer.
Someone can help me?
Hi Fred,
Could you disable the following option at salient \ footer - footer reveal effect.
See if that helps and if not then give us a link to the site we check this out from there.
Thanks.
Hi Eliud,
Thanks for your fast answer.
Your solution didn't work. It was a problem with the plugin "BestAzon".
I hope you understand me... i'm french lol
Hi Fred,
Please send in your website url so that we can provide css to remove.
Thanks.
H4 LED Bulbs: Labeling, Brands, Installation Process
Conventional head lamps with an h4(hikari h4 9003 led bulbs) cap combine low and high beam, working alternately. The dipped-beam spiral is separated by a reflector that restricts the ingress of the light flux into another part.
Not always drivers are satisfied with the light of car headlights, often the standard model is not enough in the dark. In this case, you can install ice lamps, characterized by lower power consumption and greater brightness.
The main thing is to choose the right high-quality model that will fully satisfy the needs of the car owner and at the same time will not blind the oncoming flow of cars. To make the right choice, initially you need to get acquainted with the features and types of led optics h4.
Construction
The distribution of the light beam depends on the location of the light source in the structure. With improper distribution, found in low-quality cheap samples, the oncoming flow is blinded, which is unacceptable.
Consequently, one of the main design features of non-standard car LED lamps is the correct location of the light source, strictly at the same points as that of regular halogen lamps. Otherwise, the headlight becomes not acceptable for operation.
The light source in any LED lamp for a car is the LED itself - the main element of the design. It is from him that the power and brightness of the lamp depends.
LEDs vary in shape: there are square, rectangular and round samples, as well as in size.
Each LED has its own amount of luminous flux, measured in lumines (lm). Several LEDs can be used to achieve the specified brightness parameters.
The size and power of the lamp depends on the shape, dimensions and number of LED elements.
For the operation of the LED, a special chip is used, a driver that heats up during operation. To cool it, the design necessarily includes a cooling system. It can be:
passive - is a flexible radiator consisting of many ribs resembling a "beam". This option is suitable for designs with a small driver.
active - is a special fan built into the design. It is used for more powerful variants with a large, very heated driver in the process, for which a passive system is not enough. Such a cooling system significantly increases the size and power of the lamp.
Tips for choosing
When buying diode models h4 for cars should be based on such parameters as:
Location of LEDs. The arrangement of the elements in the structure should be as similar as possible to the filament in a conventional lamp. Such options give the most correct distribution of light, and, as a result, good visibility and safety for oncoming cars. You can even estimate the location of the LEDs by eye. To do this, you need to take a diode lamp and a regular sample, and then compare them, looking at the lumen.
The size of the sample. Many samples of diode models h4 have much larger dimensions than the classic halogen version. Such options may simply not fit in the headlight, and then you will have to make special holes in the lid or buy an enlarged headlight cover. It is better to avoid such unnecessary painstaking work, unnecessary expenses and choose a lamp of the appropriate size.
The amount of luminous flux. You must adhere to the manufacturer's recommended values. Since insufficient light will not give proper visibility, and too strong - will interfere with oncoming motorists.
Normally, a conventional h4 lamp has a brightness of no more than 1000 lm when the low beam is turned on and no more than 1500 lm when the high beam is turned on. When choosing a diode lamp h4, it is worth buying models no more than one and a half times brighter than usual.
Color. Today you can find cold or warm bright white light. Color with blue, blue and lilac shades. The most comfortable for the human eye is light resembling sunlight, respectively, it is better to choose white daylight (warm) light. It is at this shade
a person sees the surrounding objects as clearly as possible.
Source: https://hikariled.org/
Hi there,
The footer area here https://hikariled.org/ does not look anything like the screenshot you sent us in your initial message -
You also mention your managed to work out the issue as it was being caused by a plugin named BestAzon.
We are assuming you are okay.
Can you clarify so we can close this thread.
Thanks.
This is in Safari, in Firefox seems all ok
Hi Bjoern,
I see you have responded on another user's ticket, please let us know the issue you are experiencing.
Thanks.